Looks like it is strong enough to take an 850 lb load on each of the engine
attach points. (You must be the judge, of course.)

Here are the FEA results:

         Bill Dube'

Hi Bill,
I can see that, as expected, the highest stress is at the center of the
beam and of course that is where the likely failure point would be.
That is shown in the first rendering; could you elaborate a little on
the other two? With thanks, Dave McC


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.