Even though selling separate engine components is not our business,
Mistral has decided to do it for selected components or subassemblies as
a service to the sport aviation community and for the general promotion
of the rotary engine.



Specifically, we do sell our intake assembly or portions thereof.
However, we *only guarantee* that our parts will fit a normally
aspirated 13B block ’89-’92 model. It will also fit a turbo block of the
same generation but special conditions do apply (please get back in
touch with Mistral Engines if you are building a turbocharged engine).
Even tough our parts *may* fit other 13B blocks, we do not guarantee
that they do or can be modified by individuals to do so.  Mistral *will
not* make custom modifications to its parts.  However, should they not
fit or be made to fit, we *will take them back* if shipped back to us,
like new, at the buyer’s costs within 30 days.



I would also like to warn that our runners are tuned in length and
diameter for our whole system.  It is quite possible that they’d be
sub-optimally dimensioned if parts of this intake system are changed.



We *do not* extend any warranty on material and workmanship on separate
components.  We only certify that these parts come from the same batch
as parts going in complete Mistral engines and that they passed the same
quality tests.



Our prices for intake components are the followings:  (include all
necessary gaskets, seals and mounting hardware)

-       Intake plenum with throttle assembly, complete:
        US$ 990

-       Intake manifold:
                                                          US$ 670

-       Set of 4 runners, flexible hoses and mounting
hardware:            US$ 185

*-    Complete intake
system:                                                     US$ 1,790*

As injectors are positioned on the “hot side” of the engine in Mistral’s
design, we strongly recommend that you buy with our intake manifold the
fuel rail and fuel injector box kit designed to go with it.  The fuel
injector box has been designed to collect possible fuel leaks and vent
them overboard.

-    Fuel rail and fuel injector box,
complete:                                  US$ 270



These prices do not include shipping.



Mistral Engines is also selling its backplate, accessory casing (water
pump, oil pump, alternator mount, etc) and oil sump as separate
assemblies.  Please contact the company for a quote.



At least for the time being, separate components can only be
manufactured in conjunction with an engine manufacturing batch.  The
next deadline for ordering intake components is September 30^th 2005 for
November deliveries.  A later batch is planned for February or March
2006 deliveries.  Parts are payable on order.





François Badoux, CEO

/MISTRAL Engines SA/

37, ch. J.-Ph. de Sauvage

CH-1219 Geneva

Switzerland

Tel:       +41-22-797 4323

Fax:      +41-22-797 4359

Mobile: +41-79-210 5925

email:    f.badoux@mistral-engines.com <mailto:f.badoux@mistral-engines.com>

Web:    www.mistral-engines.com <http://www.mistral-engines.com/>


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.