Matt

Yup... you are right.   I am also curious if the sensor can be just a pin
and a concentric ring around a pin encased in plastic and installed through
the spar in several locations.

What is the output signal from the sensor?  A resistance value or a simple
gate? I would like to assign a value to each of the sensors and interface it
to the digital or analog gauges. It would be rather simple to make a
resistance value for each sensor chip output if analog.



Doug in Japan

-----------------------------
YIKES!!
I would be very reluctant to install something "through the spar". You could
be jepordizing the strength of the spar.
Bill Schertz
KIS Cruiser # 4045