Paul,  I have the photos of your alternator bracket.  Any chance
there is a measured drawing?   Jerry

Not much of one. If you are not using the crank angle sensor
the dimensions are not critical. I made mine out of a chunk of angle
iron. Don't make them out of aluminum. Aluminum alternator brackets
are infamous for cracking for some strange reason. 4130 is the best.

Here is the drawing.
http://www.rotaryeng.net/alternat.gif
And a picture.
http://www.rotaryeng.net/assembled-alt.jpg

Not guaranteed to fit your alternator. You will have to build a prototype.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.