Subject: [Fwd: Re: Scale P51 3 rotor/ Reno]
From: Rotary Engine
Date: 9/19/2005, 8:24 PM
To: AA-me


This is the old TASK/FEW 66% scale P51.
The company has been resurected and is now back in it's old
home Santa Paula. It is now called Legendary Aircraft LLC
www.legendaryaircraft.com Honeycomb fiberglass construction.

It is now flying with a 390 pound (less PSRU) LS 5-6 Chevy V8 but it would
be perfect for a 3 rotor. The wing is movable through out a
six inch range so the lighter weight 3 rotor would not upset
the CG. No new rad ducting needed so that should save some building
time.

Paul Lamar


That plane was selected at an unfortunate size the Olds and V6 did not do
the job
and it was always too small for a V8 - I wish them welll - Maybe a Wankel is
the answer.

Sport class Reno results were interesting - the old fox Greenemeyer pulled
out a couple of mph
and beat The Thunder Mustang again. Most interesting was that the magic NXT
low
drag did not seem to materialize in either Qual nor race.
Vance


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.