Subject: Scale P51 3 rotor/ Reno
From: Rotary Engine
Date: 9/19/2005, 11:13 PM
To: AA-me



This is the old TASK/FEW 66% scale P51.
The company has been resurected and is now back in it's old
home Santa Paula. It is now called Legendary Aircraft LLC
www.legendaryaircraft.com Honeycomb fiberglass construction.

It is now flying with a 390 pound (less PSRU) LS 5-6 Chevy V8 but it would
be perfect for a 3 rotor. The wing is movable through out a
six inch range so the lighter weight 3 rotor would not upset
the CG. No new rad ducting needed so that should save some building
time.

Paul Lamar



That plane was selected at an unfortunate size the Olds and V6 did not do
the job
and it was always too small for a V8 - I wish them welll - Maybe a Wankel is
the answer.

Sport class Reno results were interesting - the old fox Greenemeyer pulled
out a couple of mph
and beat The Thunder Mustang again. Most interesting was that the magic NXT
low
drag did not seem to materialize in either Qual nor race.
Vance



I was standing next to Kevin Eldridge on Saturday while he was talking
to another race fan..  He was commenting on the impression of the other
fan that it didn't sound like Eldridge was particularly pushing it to
stay in third.  He wasn't.  Noticebly lower RPM than Greenemeyer.  First
two laps in the gold race Eldridge had the 4th place airplane kind of
close, but then walked away from him.  Eldridge was saying that it was
fun and scary at the same time.  I don't think HE was quite up for going
after the next place.  Stock engine against major factory tweaks..

Matt-

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.