> Mark's fuel injection system.
>
> I got the 3/8th Teflon I am waiting for the 3/8 spacer from Tom.
>
> Paul Lamar

That's a lot of butt splices.

I started with Mark's generous wiring harness :) It works.
It would be nice if we could get connectors for fuel injectors and
coils where the wire was not already potted into the connector. In
other words, connector shells and bare connector pins.

Paul Lamar

I have those for the LS-1 (D-580 version) coils and injectors with the
alignment tab in the center.  http://www.roblinphoto.com/shop/

Bob W.

--
http://www.bob-white.com
N93BD - Rotary Powered BD-4 (real soon)
Prewired EC2 Cables - http://www.roblinphoto.com/shop/

Good going Bob. Is this stuff on your web site? If so I will mention
that fact on my web site below. I also need pictures.

Paul Lamar

OK got some pics off the  http://www.roblinphoto.com/shop/
web site. Here they are.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.

Hi Paul,

I have long wondered why you put so many big attachments in your emails.
It fills up the email servers pretty quickly.  This particular message
finally prompted me to ask about it.  The website was listed already.  It
would have been pretty easy to put the pic on your website and then post a
link or just post it like this:

http://roblinphoto.com/shop/popup_image.php?pID=31'

Are there a bunch of people that access email from places that don't have
web access?  That's the only reason I can think of that would make this
method more useful to the users.


No big deal, just curious.


Matt-

Just for immediate gratification :) Most of us have 100 gig drives.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.