Paul, what would you require to do a 3D of the proposed layout for a Lancair
Legacy Fixed Gear?

Bill Bradburry


Just a sketch of the hard point dimensions on the firewall and an outline
of the firewall. Also the position of the thrust line and
the distance from the firewall to the stock cowl prop opening.

Section lines on the cowl would help but just a few width and height
dimension on the cowl 1/4 1/2 and 3/4 back would be sufficient
along with a photograph or two. Make sure everything fits under the cowl.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.