I dont recognize that file format.  I only have a solidworks viewer here
and it doesn't open it.  What do you use to view it.  It does not seem
to be a native solidworks file.

What are you using?

Thanks,
John

Hi Paul,

I just read you article on cooling the rotary.  I was particulary interested and will
do more research on the NACA issue.  I know of one canard (John Slades) which seems
to be working with a NACA.

Anyway, I would like to start modeling my installation.  I will be using SolidWorks.
   Do you have dimensions of the engine that you could provide or a source for them so
that I can start putting it together.  I dont currently have an engine so I cant take
direct measurements.  I'm planning on using the Renesis engine.


Thanks alot,
John

Do you want some 3D in solid works file format?

Paul Lamar

I would like that as well Paul. I too would like to start modeling an installation. Solidworks would be fine for me.

Ken Bauman

Try this one.
 
----------------------------------------------------
     Name: MONTY_ENGINE.ZIP
     Type: application/zip
 Encoding: base64
   Length: 261.4 KB

I dont recognize that file format.  I only have a solidworks viewer here
and it doesn't open it.  What do you use to view it.  It does not seem
to be a native solidworks file.

What are you using?

Thanks,
John

It is an iges file. You need to import it into Solid Works before you
can save it as a Solid Works file format. I use rhino which is much much
easier to learn and cheaper than Solid Works. If you sign up for a course
you can get a student discount. In that case it is about $300.

Here is another iges you can try.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.