Subject: Bell 47 planetery gear assemblie]
From: Rotary Engine
Date: 9/27/2005, 1:47 PM
To: AA-me



Paul,
Looking at the Bell 47 planet set up. We have a few trucks and the one
truck specifically is a Magirius Deutz with ZF diffs. this truck has a
planetary reduction drive which looks very similar to what i see in your
attachment in its wheel hubs. The exact ratio i'm not sure of but to
give you an indication of the torque and hp this planetary gear has to
endure is extremely high.The truck is a 6x6 with a 18 ton drill mounted
on it and still pulls a 8 ton compressor behind it. The engine is a V12
Deutz Air cooled developing 400hp.

My thinking is that possibly your Mack and  International series trucks
may have simaler planetery set ups in there diffs. Although i feel the
Mack and Deutz are old school tech, and we should possibly be looking at
new era truck's with lighter and stronger planetery set ups in there diff's.
But looking at your attachment, the size and OD of the Bell 46 reduction
looks very similer in design to what i mentioned.
Craig.


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.