Subject: Bell 47 planetery gear assemblie
From: Rotary Engine
Date: 9/27/2005, 5:32 PM
To: AA-me



Paul,
Looking at the Bell 47 planet set up. We have a few trucks and the one
truck specifically is a Magirius Deutz with ZF diffs. this truck has a
planetary reduction drive which looks very similar to what i see in your
attachment in its wheel hubs. The exact ratio i'm not sure of but to
give you an indication of the torque and hp this planetary gear has to
endure is extremely high.The truck is a 6x6 with a 18 ton drill mounted
on it and still pulls a 8 ton compressor behind it. The engine is a V12
Deutz Air cooled developing 400hp.

My thinking is that possibly your Mack and  International series trucks
may have simaler planetery set ups in there diffs. Although i feel the
Mack and Deutz are old school tech, and we should possibly be looking at
new era truck's with lighter and stronger planetery set ups in there
diff's. But looking at your attachment, the size and OD of the Bell 46
reduction looks very similer in design to what i mentioned.
Craig.


Has anyone on this group been keeping track of David Algae's airplane?
He custom designed a gearbox to fit the LS-1 Chevy.   Indy car fabricator.
 We just need to get him to see the light with Mazda instead of Bowtie.

The gearbox is Carbon Fiber and beautiful (seen in person at OSH), though
as yet unproven.  He's got good credentials, however.

Pick a gearset, build some molds and lay it up.  Sounds simple...  :)
Maybe his design would be easy to adapt to the 13B.  Custom bellhousing
should be the largest change.  We might be able to talk him into it as a
side project to help with cashflow until he can get some kits sold.

General page:

http://members.iquest.net/~aca/

Custom gearbox shots:

http://members.iquest.net/~aca/images/img07.jpg

http://members.iquest.net/~aca/images/img04.jpg



Matt-

Heat will soften the resin. Too risky. Not worth
the weight saving.

You can also build a gear box housing out of six inch diameter
thick wall aluminum tubing. You will need a lathe to make a PSRU anyway.
The last pic will give you an idea just how small and light
weight the Ford A4OD 2.85 planet set really is. Used in dozens, if
not scores, of PSRUs.

Paul Lamar


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.