This is what I had in mind for a carbon fiber bell housing.
Starter will fit on either side. Motor mount brackets
are custom to suit. Rather than complicate the mold
simple aluminum spacers are used were the 10 MM bolts are located
not in the flange area. Sand cast in aluminum this would
be way too heavy.
Paul Lamar
Ti hard points? Al and CF have a reputation of not mixing well - the Al
corrodes. This looks like an interesting project.
Matt-
Ti hard points are fine with me Matt. Sign me up for one.
I just had an idea for stiffening the bolt on hard points
for the motor mount brackets. Will modify the 3D shortly.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.