Neiman Marcus has the Skycar prototype on sale for $3.5M.
http://snipurl.com/i0eh
If only Moller offered it with the Zoch Diesel....
Maybe Zzzzz or his Toadie will test fly the thing. Look for a flight
report on Aero-nut network.
>Ernesto
I'll take two.
Paul Lamar
let me guess - you have to promise to not try and fly it!
george wright
I'd say the Skycar is ok, it's the "Freedom engines" that don't work.
Anyone want to try it with some GOOD rotary engines?
George Payne
I'm not sure that anyone outside the Moller operation has actually had any
contact with his engines. Who knows how well they run? From careful
reading, it is also obvious that the industrial RotaMax engines are not the
same as the ones on the Skycar. The crux of the problem comes in several
areas:
1) they are aluminum engines with a coating (licensed from NASA) in
the combustion area. This coating was reportedly just tested by ThermoFan
in a 100 hour test. No report yet. I think I would be more impressed with a
500 hour to 1000 hour test.;
2) Moller has patented several interesting
modifications to improve lubrication and cooling - pretty critical in a
charge cooled engine. There doesn't seem to be any particular reason that
they wouldn't work.
3) We know that the earlier 530-series industrial
engines did have a cooling problem. The newer engines are liquid cooled
which should be an improvement.
4) One good piece of news is that they are
pushing on marine applications. Marine engines have loading, fuel
consumption and durability issues much closer to aircraft applications. If
anything is going to break, a PWC or speed boat is going to do it.
To me, the good news is that they are going after industrial markets, this
means sufficient production and useage to get a pretty fair idea how well
they work. By all accounts, Moller is not marketing the Skycar version of
the engines or licensing them. I don't have the slightest idea how well
they hold up or whether they generate published power levels. I do know
from the descriptions I've seen that they are "tricked out" and complex.
This is a worry from a maintenance and inspection point. They have to be
expensive, too. Certifying them might be pretty "interesting".
george wright
I have a few early pictures.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.