Subject: 20B in a Skybolt
From: Rotary Engine
Date: 9/30/2005, 4:06 PM
To: AA-me



     Paul:

     Would you happen to have a CAD model of a 20B with PSRU that you could
     lay into a Skybolt to see what kind of space problems or luxuries might
     present themselves?
     Any ideas you might have regarding the application would be greatly
     appreciated.
     I've been following the work you have been doing for the past couple of
     years and now have a virtually completed Skybolt in need of about 325
     HP. The problem is 325 HP out of a Lycoming IO 540 is more than I can
     afford. Too many college age kidds on the payroll.

     Jim Kidd, Mequon WI


     Jim can you scan those dwg in with higher rez? Can't quite read them.

     Paul Lamar


Paul:
Hopefully these tifs will give you the detail you need.

Jim

Much better Jim. Thanks.

------------------------

I think you are going to need a power bulge in the cowl :)
This is a BIG turbo. You won't need one this big unless you
are looking for 1000 HP :) No oil pan shown yet.
Side mounted intake manifold and intercooler.
One thing about a dry sump. You won't have to worry about
turbo drain back.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.