Subject: out of hospital
From: Rotary Engine
Date: 10/3/2005, 10:58 PM
To: AA-me

>
> > What info is out there on inverted flight.  It looks like the Christen
> > or Raven inverted oil system will work.  But has someone done the
> > homework for plumbing?
> >
> > What about the water cooling system?  Has someone solved that issue
too?
> >
> > Chris
> >
> >
> > Yes there needs to be some expermenting done on sustained inverted
flight
> > as far as the oil drain back system is concerned.
> >
> > Don't know what you mean about water cooling. Usually it is
pressurized
> > so there should be no problem.
> >
> > Paul Lamar
>
> If I set up my cooling system with a header tank and an overflow tank
above
> it in normal flight, then when I go negative G, or inverted, the coolant
> will flow into the overflow tank and then overboard.  My first thought
is
> that all I need is a  check valve between the header tank and overflow
tank
> and another for the overflow tank vent.
>
> Chris
>
> Certainly fluid will flow out of the over flow bottle but not out of
> the main cooling system into the over flow bottle because of the
pressure
> cap. Stock cap is about 16 psi and 30 psi is recommended. A U shaped
over
flow
> tube from the top volume of the over flow bottle will minimise
> the coolant loss from the over flow bottle.
>
> Paul Lamar

The P51 was placarded against exceeding 15 sec inverted - primarily oil
frequently our hot jocks  in Japan would expell a huge stream of white
smoke, but
no damage  after a full flight line inverted Buzz job (Kisarazu 1947)
Vance

Are you out of the hospital Vance? Can you make it over to SZP
tommorrow. We are working on Alex's airplane trying to make it cool.

Paul Lamar


Yes I am out of the hospital but still on a short string - The day after I
got out I had to put
Emily into the Pleasant Valley hospital with pneumonia. I did get over to
the Camarillo
airport to watch Rich's plane being loaded on its way to El Salvador See pix
That really is me in the blue shirt
Vance

Hope everybody gets well soon.


BTW how is your mill working?
I may need some stuff milled.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.