Subject: [Fwd: Re: Stainless Equivalent for 4130?]
From: Rotary Engine
Date: 10/4/2005, 4:43 AM
To: AA-me


> Hi Doug,
> I did the same made a stainless steel cabinet with glass top and pop
riveted
> it together with silicone. It sure turned out great but a little heavy
and
> expensive.
> My bother in law came over and said he made one as well, out of ply, I
said
> that would be no good as the blaster would destroy it - he said no
problem,
> as he lined it with rubber matting. His was very cheaply made compared
to
> mine and a lot lighter.
> Live and learn!
> George ( down under)

>
George,

I'm curious did you create a funnel on the floor to easily drain the sand
out?  Is the entrance on the side or top glass frame?

Doug in Japan

Doug,
At first I didn't build the bottom funnel, but found it hard to pick up the
sand without the depth of the funnel as the sand would soon be picked-up
from a shallow area and then nothing - with the steep funnel there's no
problem. It was a simple add on anyway.

The next mistake I made was to put on a flat glass top and the sand
reflected onto the glass and I soon couldn't see through it as it was sand
blasted. Now I know the reason I need the sloped top and that's the next
add-on.
Timber is fine with rubber glued to it - simple contact will do.
Don't make my mistakes !
George ( down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.