Subject: Landing in chop can be hazardousto your craft.
From: Rotary Engine
Date: 10/5/2005, 5:32 PM
To: AA-me


Hey Bill,

What kind of dock or lift were you using?  I'm looking into how to best
get my Goose into the river at my house.

Scott Gettings




Scott,
I engineered and built a 3 piece folding ramp that extends out about 32 ft.
It is hydraulicly powered. The county enviromentalist wouldn't let me build
into the water. This was my answer. Now they are telling me to remove it or
be punished. In this picture it has been disconnected and moved away from
the seawall to satisfy their demands. Want to buy it?
Bill Hyde


How is the sales of the AC parts coming Bill? If you need more
announcements let me know.

Paul Lamar


No sales yet but I'am gaining confidence in rebuilding the wing using the solid foam method.

Bill Hyde


Thats the spirit Bill :) BTW is the sponson cracked too?

Paul Lamar


    What about the other wings ??  Yon can bet your sweet bippy that
the other wings are over stressed and are are on the verge of giving
out.
  There have been a couple of coots that damaged a wing on rough
water much like you did and repaired the damaged wing and then the
other wing came apart in flight.
  Ken Welter




Have a friend that applied two layers of carbon fiber (vacuum bagged) on
his 4P wings, trailing edge top, around the nose to trailing edge bottom
and it added 10 lbs per wing.  That might be your wing strength solution.
RRR
Amarillo, TX


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.