> What about the other wings ?? Yon can bet your sweet bippy that
> the other wings are over stressed and are are on the verge of giving
> out.
> There have been a couple of coots that damaged a wing on rough
> water much like you did and repaired the damaged wing and then the
> other wing came apart in flight.
> Ken Welter
>
>
Have a friend that applied two layers of carbon fiber (vacuum bagged) on
his 4P wings, trailing edge top, around the nose to trailing edge bottom
and it added 10 lbs per wing. That might be your wing strength solution.
RRR
Amarillo, TX
There is a reason all certified aircraft have load testing performed on
their primary structure.
We limit load tested a French Stern ST37 here a few weeks ago. (it
passed with flying colors) It is not a big job if you plan it well. Has
this amphibian design ever been limit load tested? Many homebuilt design
have never been. I know of at least three well known designs that had
failures when testing to limit load at Va, due to failure to carry the
forward load, here in Austria. The worst failed at 2.2g.
Don't just believe the designers claims, expect them to provide a
detailed documented load test report, or test your own A/C before flight.
Mark
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.