What do p-port rotary engines do extremely well?
Why they breathe like an elephant.
How do the French keep the rotary engine from dominating
LeMans 24 hour endurance race year after year?
Hey Pierre, how come my Renault does not have a rotary engine?
Why they choke the hell out of it by making it breath through
this half dollar size opening.
Paul Lamar
all endurance racers run with intake restrictions. ds
Yes but; for a given displacement that is a handicap
on rotaries. The volumetric efficiency of a p-port rotary
is typically 50% higher than a piston engine therefore unrestricted
intake rotaries have a tremendous HP advantage. The p-port rotary is in
the 120% to 130% range while that of a piston engine is
lucky to see 80% to 100%. Mainly because piston engine intake valves
are restrictions.
It is a subtle thing and a very shrewed way of the French
to handicap rotaries.
As I recall the French also outlawed variable intake pipe lengths
Used on the 1991 Mazda rotary winner.
Rotaries are also handicapped by minimum racing car weight rules.
This negates the tremendous HP to weight advantage of
rotaries. An aluminum end housing 4 rotor would weigh in the
neighbor hood of 300 pounds while putting out 700 HP in
normally aspirated form. A piston engine would be a hand grenade
if you could get it down to 300 pounds at 700 HP. The same
4 rotor engine turbo charged is pushing 1600 HP in racing
trim.
If it were not for these arbitrary handicaps rotaries
would dominate all forms of car racing as they started to do in
the 1980's in car racing before they started to be handicapped
and as they will soon dominate in light aircraft engines.
Paul Lamar