Subject: Source for reasonable 316 SS turbo maniffolds.]
From: Rotary Engine
Date: 10/9/2005, 11:38 AM
To: AA-me


   Attention Dave Leonard!
   These people are ten minutes from the Palomar airport.

   http://www.speedmachineperformance.com/home

   Here are some turbo installations they have done.
   Unfortunately they are in cars so I can not get
   good pictures.

   Paul lamar


I have been to their shop a few times.  They charged me $350 to port my
plates (and it took 6-months) but I swear there is no change in size
other than grinding marks on the inside.

Seem like pretty good guys in general when you are there.  I think they
have done some work on Al's engine, and also the hover craft that was at
Ramona for a while.

They are busy building tweak cars.  Only one guy is really
knowledgable.  And even he has a hard time making to jump to what is
needed for an aircraft.

Dave Leonard

Turbo Rotary RV-6 N4VY
http://members.aol.com/_ht_a/rotaryroster/index.html
http://members.aol.com/_ht_a/vp4skydoc/index.html
<http://members.aol.com/_ht_a/vp4skydoc/index.html>
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.