What do p-port rotary engines do extremely well?
Why they breathe like an elephant.
How do the French keep the rotary engine from dominating
LeMans 24 hour endurance race year after year?
Hey Pierre, how come my Renault does not have a rotary engine?
Why they choke the hell out of it by making it breath through
this half dollar size opening.
Paul Lamar
> all endurance racers run with intake restrictions. ds
Yes but; for a given displacement that is a handicap
on rotaries. The volumetric efficiency of a p-port rotary
is typically 50% higher than a piston engine therefore unrestricted
intake rotaries have a tremendous HP advantage. The p-port rotary is in
the 120% to 130% range while that of a piston engine is
lucky to see 80% to 100%. Mainly because piston engine intake valves
are restrictions.
It is a subtle thing and a very shrewed way of the French
to handicap rotaries.
As I recall the French also outlawed variable intake pipe lengths
Used on the 1991 Mazda rotary winner.
Rotaries are also handicapped by minimum racing car weight rules.
This negates the tremendous HP to weight advantage of
rotaries. An aluminum end housing 4 rotor would weigh in the
neighbor hood of 300 pounds while putting out 700 HP in
normally aspirated form. A piston engine would be a hand grenade
if you could get it down to 300 pounds at 700 HP. The same
4 rotor engine turbo charged is pushing 1600 HP in racing
trim.
If it were not for these arbitrary handicaps rotaries
would dominate all forms of car racing as they started to do in
the 1980's in car racing before they started to be handicapped
and as they will soon dominate in light aircraft engines.
Paul Lamar
Gee they give you an opening based on the "claimed displacement"
I would call they being "hoised by your own petard"
Vance
There you go again claiming the 13B is the equivalent of
six cylinder 3.9 Liter piston engine. I hope to convince you
before I die that the 13B is only equivalent to a four cylinder
2.6 liter engine. That is my goal in life.
BTW Mazda is working on direct injection 16B. Should have a bunch
more torque. I might have more info on it when I get back from the
Tokyo show. Apparently the RX8 is making a tidy profit for Mazda so they
are going all out on a couple of new rotary engine powered cars. One of
which is a hybrid. I am very happy to see this. No, not the
hybrid, just the rotary engine success in general. They sure and
heck are not going to make money in the econo box segment of the
market. The Chinese cars are almost on the boats. The RX8 is outselling
the cheaper Miata.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.