snips................

> >
> > If you are exhausting to the rear (flywheel)

of the engine, why

> > don't you just use the stock exhaust manifold?

It only weighs

15 > > lbs and will need about a foot of pipe on the

end to reach out

of > > the cowl.  How much weight can you save by

building your own

and how

> > much will that wt savings cost?
> >
> > Bill Bradburry
>
>
> Bill,
>
> That is definitely an option.  I (will) have a

stock exhaust

manifold
> with my Renesis, I just don't have it yet.
>
> Scott

Hi Scott,   I have the stock exhaust manifold for

the Renesis, I am

notgoing to use it.  If and when you decide to use

one, tell me.

Rino Lacombe



Scott,
Did you get the  Renesis Idler Pully Assembly with

your engine? I need

one to support my supercharger installation. My

crate engine did not

have one. If you do and are not planning to use it

would you consider

selling it?

Thanks,

Bobby Hughes

Rino and Bobby,

Thanks for the exhaust manifold offer; I have one
coming with my engine, but just haven't seen it yet.
The engine is still at Bruce Turrentine's shop.

I bought the entire engine, including all the
pulleys, but anticipate using them.  I'll let Bobby
know if for some reason I don't need the idler pulley.

Scott Gettings