Subject: Le Mans Pport exhaust
From: Rotary Engine
Date: 10/12/2005, 3:30 PM
To: AA-me


Consensus for the exhaust tuning is two pipes around 32 inches.
Racing Beat has been selling headers like that for 30 years.

Paul Lamar

Does any one have a drawing or sketch of the 13B Exhast flange.  I'd like
to program
the part in the CNC Plasma and play around with Stainless Steel cutting.
Paul what
thichness of SS should I try?  T.W.

I would try 3/8" SS. I think the stock RB flange is 1/2" mild steel.
If you all really want to cut the weight go to the four bolt
flange.


Paul Lamar


Paul,

Is the diaphragm type device on the side of the engine near the water pump
an apex oil supply? It appears to have some control system and the outlet
pipes enter the chambers.

Thanks, Colin Smith

That is a mechanical fuel injection system.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.