Subject: water pump mod and intakes
From: Rotary Engine
Date: 10/20/2005, 7:50 PM
To: AA-me


>
Paul,
  Here are the pictures of the Renesis engine cooling system I set up for
Ben Schnieder.
Thanks,
Ed

WOW!
That's a beauty Ed. If you want an OSH winner goto Ed.
Drop the front of the rads down a few more inches and come
in over the top of the rads with a Kays and London wedge s
shaped diffuser.

What happened to the silicone water hose? I see you got the
right hose clamps on there. Constant torque.
Turn the rads around with inlets and outlets at
the back and you will shorten the rad hoses.

For the new guys that is a Will James James Aircraft RV8
cowl specifically designed for rotary engines.

More pictures with the next message.
--------------------------------------------
Next message.

-- 
Paul Lamar ...No rotor no motor.

Great work, Ed.

Are you planning to make the intake system, water pump mods, etc.
available to other Renesis-engine builders?

Scott Gettings

Dear Scott Gettings
       The intake in the pic was only welded up by me Ben Schnieder
designed it ,cut it up and fitted it together.. As far as the water pump mod
yes I can do them and the oil cooler/rad system with the sq frame also.Let
me know of your interests.
                                                               Regards
                                                            Ed Klepeis
techwelding@comcast.net



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.