> > I've now reached the point where most of the fuel system components have
> > been mounted & are ready for final plumbing.  I'm now looking where to
> > install (mount) the spark igniters.
>
> Has anybody looked into coil on plug thingies from ford/chevy?
> jofarr, soddy tn
>
> Power Sport does something like that.
>
> Paul Lamar ...No rotor no motor.

Jofarr,
Bob White or Tracy can supply the right coils - I am using the D581 Ford and
Chevy Pick-up coils. You can get the coils from GM Parts Direct but the
connectors are expensive, the ones Bob supplies are Delphi ( aftermarket I
think). I believe he has now sourced the right connector for the D581 and is
awaiting supplies.
Bob also supplier a harness for the EC2 and one for the coils etc.
George (down under)

I have some connectors that I think are for the D581 on order.  If I
find that they are the correct ones, they won't be too expensive.  I
should be able to sell them for about the same price as the D580
connectors.  Unfortunately, they are out of stock at the supplier till
11/25.  If anyone is interested, the cable that connects 4 D581 coils
to a 7 pin connector is GM p/n 12582189.  P/n 12569111 used to be
the cable for the D580 coils, but it isn't valid any more.

Delphi is the primary supplier to GM, so these are the original
connectors used by GM.  (I hope the Delphi bankruptcy stuff doesn't mess
up these sources.)  I don't think Ford factors in anywhere here, but
they probably have a similar product. :-)

Bob W.