Perhaps we could ask Lancair to give us the dimensions
relative to the firewall hard points instead of the
canopy rails.

Paul Lamar ...No rotor no motor.

Paul, I measured the longerons on the Legacy. They come out to 9.25" below
the top of the cowl or 1.125" below the top hardpoints.  The drawing shows
the thrust line to be 1.5" below the longeron line, then angles down 1
degree and to the right 2 degrees.

Bill Bradburry

OK Bill that makes a lot more sense. I'll work on it some more.

BTW you are using the 2.85:1 gear box as that has the prop
rotating in the right direction?

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.