Subject: exhaust wankel motor
From: Rotary Engine
Date: 10/29/2005, 7:37 AM
To: AA-me



Dear Mr Lamar
I found your coordinate on  www.monito.com/wankel/aircraft.htm
<http://www.monito.com/wankel/aircraft.htm>
I'm helping a friend who is installing a Wankel Mid-West motor AF100R
.on an aircraft derivated from the Lynx.
We are looking informations about the exhaust system, which was not
supplied by the manufacturer.
Do you know some place where we can get informations, computing ,
designing, tuning an manufacturers of such parts.
Also, I try to join Mid-Wesrt manufacturer in UK, but the email adress
do not aswer any more. May be you know the adress of the new
manufacturer of this engine.
Many thanks
Daniel Grunspan

Two 32 inch long pipes will work fairly well.
Midwest was bought by Diamond Aicraft in Werner Nuestat Austria.
Send Chris Dries email, tell him what you are doing and ask him
for the parts you need.

Diamond Chris Dries <c.dries@diamond-air.at>

If that does not work try these two guys.


Diamond Richard Negus <r.negus@diamond-air.at>
Diamond Martin Ruhe <m.ruehe@diamond-air.at>

There is not much on their web site about the rotary
engines. They do have parts however.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.