yes.

Justin Hawkins
Lancair Tech Support
541-923-2233


Thanks, Justin.

Just to check my measurements,  I show the Longeron line to be 9.25"
below the top of the cowl or 1.125" below the top hardpoints.  The
drawing shows the thrust line to be 2.5" below the longeron line, which
would place the thrust line 3.625" below the top hard points, then
angles down 1degree and to the right 2 degrees.
Do you agree with my measurements?

Thanks,
Bill Bradburry

Paul, The above answer was received from Lancair Tech Support.

Bill

OK we will take that as the gospel for teh Legacy.

Paul Lamar ...No rotor no motor.

OK here it is. The 2 degrees off sets the nose of the PSRU so we still need the
cowl. For all I know Lancair off set the thrust line on the firewall
moving the engine over to the right putting the prop in the center
of the cowl.

It would be nice if Lancair gave us a real drawing.