Hey Paul, Which Bell housing should I buy to use with Tracy's RD-1C.
Manual or Auto and does the year matter? What modifications will I need
to do? Thanks in advance Tom Webber

--------------------------------------------------------

Lots of mods but just about any separate bell housing will work.
One decision is how long do you want the PSRU? The standard
length is around 14 inches. That means part of the PSRU will
be inside the bell.

Tracy will make a longer shaft at extra cost if you want to
make a longer PSRU like the last pictures of Bulents set up.

Paul Lamar ...No rotor no motor.



Paul, Tracy said somewhere recently, no more longer units. That was in
response to questions about Buly's unit.
Bill Jepson

We just got email from hime last week and he said he changed
his mind. This is not here nor there however as with this trick you
can use the stock lenght shaft.

"Paul,
 I finally got the CNC setup to do long input shafts to fit a 2nd gen
bell housing used with a custom  1/2" plate (not supplied by RWS) on the
front of the bell housing.  It is an extra cost item and the lead time
is longer because I don't stock them and they are made one at a time
instead of in batches.   Kelly Troyer got the first CNC version of this
shaft.

The bell housing looks cool and all that but FWIW, I'd go with the
standard plate & spacer setup for pure function.

Tracy Crook"


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.