Paul, we need a new drawing for the scratch built oil pan that takes
into account the s-beam.   It should include the rear strut bracket.
I did simple side view to explore the problem.  Looks like the pick
up will have be relocated at the very rear of the pan.  The stock
version could cut, rotated to the back of the pan and then
reassembled.  It might have to be lengthened too.  Here is my little
drawing.    Jerry



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.