Hello all-

I'd like to add some EGT sensors to my VAM muffler build.  Which sensors
do I need, and how / where will I be attaching them to the VAM?

My thought was to have one sensor for each rotor (presumably located
near the exhaust manifold flange, upstream of the VAM itself.  Would
there be a benefit to a 3rd sensor somwhere downstream of the VAM to
measure temperature drop there?  I was thinking such a 3rd sensor would
provide interesting information on whether the center tube in Jerry's
VAM design is accomplishing any cooling.

Mark Supinski


-----------------------------------------
Here is the source of all sources :)

http://www.omega.com/

http://www.omega.com/temperature/tsc.html

http://www.omega.com/manuals/?s=c


The third sensor would be great from a materials point of view.
Perhaps we can lower the cost odf materials down stream.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.