Paul I,m looking for a source(s) for a NA intake manifold setup for my
Renesis rotary.  I'll be using this engine in a Glastar and would also a
source for a O.E.M. oil cooler.  I got my engine from Bruce Turrentine
new, set up for aircraft use.  Thanks, for your help,  Gary Luchini

--------------------------------------------------------

I don't know of any off the shelf aircraft manifolds available for the RX8 engine.
You can fabricate one pretty easy out of tubing and aluminum sheet
if you or your welder knows the tricks. Try Ed Klepeis and
Tech Welding

Edward Klepeis <techwelding@comcast.net>

If it were me I would go P-port.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.