Subject: Ian bell housings
From: Rotary Engine
Date: 2/3/2006, 7:08 PM
To: AA-me


    >
    > Can one of you Aussie mates please figure out the name of this
    > place in Sydney that manufacters and sells these
    > transmission adapters? As far as I can tell Google does
    > does not know about them. I have a biz card some place I think.
    >
    >
    >
    > Jap Performance would probably know who they are if you
    > call them first.
    >
    > http://www.japperformance.com/
    >
    > JAP Performance (Sydney, Australia)
    >
    > Phone +612 9601 6715
    > Fax +612 9821 4525
    >
    > 6 Kelso Crescent,
    > Moorebank,
    > New South Wales,
    > Australia.
    >
    >
    >
    > Paul Lamar ...No rotor no motor.
    >


   The company for the bell housings is
   Dellow Automotive Pty. Ltd.,
   37 Daisy Street,
   REVESBY.  NSW  AUST.
   02 9774 4419

   They manufacture motor accessories and are in a suburb of Sydney. I will
   ring them on Monday and find out if they have a web site.
   Colin Smith
   Sydney


   Thanks Colin. The one we are looking for is about 80 to 100 mm deep.
    From where it bolts to the back of the Mazda engine to the bell housing
   back face. It looks somthing like this. A phone number would be good
   as well as price, weight and cost of shipping to the US.

   Thanks again
   --
   Paul Lamar ...No rotor no motor.

Paul,
Is this the bell housing?
http://www.conversioncomp.co.nz/productinfo.php
Ben

I don't think so. I don't see anything there that looks like Ian's
bell housing.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.