Iv'e got two rad pressure caps, one is 23-25 LBs, and the other is 27-29
lbs. I got them from JEGS, they are made by Moroso. The 27-29 will be on
the radiator, which is below the engine, and the 23-25 lb will be up
high on the water pump filler.

Brian Trubee

In effect you only have one... 23-25 psi. the other one will never get
a chance to operate.

Are you trying to use these is series?

Paul Lamar ...No rotor no motor.

No, not trying to use them in series. I don't want the lower one to
open, just the upper one. The only reason to open the lower is to bleed
the air out of the high point of the radiator.  I just mentioned the
ratings on the caps because I saw some discussion about how high the
ratings on some caps went.

Brian Trubee



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.