>
Paul,
Not to imply that I have changed my mind about the P-tank, but, it
occurred to me that a 3" x 12" version of these Bimba cylinders may be
large enough. The weight would be about 6.5 lb, the cost around $150.
The rod would require space, but, would show the level of fluid. The
seal material is Buna-N, a higher temp. is available as an option. A
magnet in the piston is also available to activate an external reed
switch for position sensing. Using one of these would require only that
we fabricate a manifold with a pressure cap to connect the cylinder to
the cooling system.
The 70xx-D cylinder is on page 1.63 in the "Original Line" Bimba catalog.
http://www.bimba.com
Just food for thought,
Aubrey
------------------
Aubrey,
Question what do you do with the piston rod ?
A floating piston system does not have one at all.
If you were to use something like that you would have to allow for the
rod to go somewhere.
Regards David Gaze
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.