Looking forward to hearing from you.
>> Kind regards,
>> Rupert Gardiner,
>> ASIAN AUTO SPARES
>> 198 Kingston Road,
>> SLACKS CREEK Qld 4127
>> Tel (07) 3208 0133
>> Fax (07) 3208 0514.
>>
>>
>> If this is Legitimate I want one.
>> Rick Irwin
>
>
> I bought one of Rupert's RX-8 engines (6-port) on Ebay about 6 months
> ago. At the time, the US dollar was a bit stronger, so the price was
> $1800 USD. Now it is closer to $1900 USD.
>
> My engine arrived exactly as pictured. Complete with engine harness,
> injectors, fuel rails, intake manifold, throttle body, alternator, and
> sensors. Oil cooler lines are present, but bent close to the engine
> for
> shipping.
>
> It arrived nicely padded and strapped on a pallet about 2 months
> after I
> bought it. Shipping was about $300 to Denver. Paperwork fees were
> about
> $200.
>
> I have not run the engine yet, but it seems just fine from what I can
> tell by inspection. I put a borescope in the ports. The rotors, seals,
> and walls look fine. No scoring or hot spots were apparent. Seems to
> have great compression turning by hand. I would take a very rough
> guess
> at 20,000 miles, judging from the minor carbon on the rotor faces and
> exhaust ports.
>
> These engines have never been in a car. They were used by Mazda for
> some
> sort of dyno testing. I suspect emissions testing, but that is just a
> wild guess. The clutch and pressure plate on mine had zero wear.
>
> I considered this engine from Rupert a super good deal. When I
> bought it
> for such a low price, I knew that I would still be way ahead even if I
> had to rebuild it. The fact that it is in such good condition that I
> won't likely have to do anything internally was a bonus, from my
> perspective.
>
> Rupert is a good guy to deal with. Very helpful and a square dealer.
>
> Bill Dube'
Bill,
I am having a problem contacting Rupert via FAX as it will not go
through. As a previous "happy" customer I thought you might be able
to confirm that his enclosed FAX number is correct or, better yet,
you may be able to provide me with his email address. If not then
calling him will be next to try as soon as I can determine the time
difference and call when he is actually awake:)
Thank you,
Randy
Randy,
I think he changed his e-mail a little time ago to
AS8391@bigpond.net.au
Try that one.
George ( down under)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.