Subject: I own one of Rupert's engines. (was: RX8 Engines)
From: Rotary Engine
Date: 2/5/2006, 7:29 AM
To: AA-me




Hello,
My name is Rupert Gardiner.  My company name is Asian Auto  Spares.  We
have quite a number of RX8 test engines, 4 port and 6 port and was
wondering whether your company would have a use for them.  Our  price per
engine is $2,200AUD plus freight.
Please find enclosed photo of such and hope they will be suitable.
Looking forward to hearing from you.
Kind regards,
Rupert Gardiner,
ASIAN AUTO SPARES
198 Kingston Road,
SLACKS CREEK  Qld  4127
Tel (07) 3208 0133
Fax (07) 3208 0514.


If this is Legitimate I want one.
Rick Irwin


I bought one of Rupert's RX-8 engines (6-port) on Ebay about 6 months
ago. At the time, the US dollar was a bit stronger, so the price was
$1800 USD. Now it is closer to $1900 USD.

My engine arrived exactly as pictured. Complete with engine harness,
injectors, fuel rails, intake manifold, throttle body, alternator, and
sensors. Oil cooler lines are present, but bent close to the engine  for
shipping.

It arrived nicely padded and strapped on a pallet about 2 months  after I
bought it. Shipping was about $300 to Denver. Paperwork fees were  about
$200.

I have not run the engine yet, but it seems just fine from what I can
tell by inspection. I put a borescope in the ports. The rotors, seals,
and walls look fine. No scoring or hot spots were apparent. Seems to
have great compression turning by hand. I would take a very rough  guess
at 20,000 miles, judging from the minor carbon on the rotor faces and
exhaust ports.

These engines have never been in a car. They were used by Mazda for  some
sort of dyno testing. I suspect emissions testing, but that is just a
wild guess. The clutch and pressure plate on mine had zero wear.

I considered this engine from Rupert a super good deal. When I  bought it
for such a low price, I knew that I would still be way ahead even if I
had to rebuild it. The fact that it is in such good condition that I
won't likely have to do anything internally was a bonus, from my
perspective.

Rupert is a good guy to deal with. Very helpful and a square dealer.

Bill Dube'



Bill,
  I am having a problem contacting Rupert via FAX as it will not go
through. As a previous "happy" customer I thought you might be able
to confirm that his enclosed FAX number is correct or, better yet,
you may be able to provide me with his email address. If not then
calling him will be next to try as soon as I can determine the time
difference and call when he is actually awake:)
Thank you,
Randy



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.