Subject: I own one of Rupert's engines. (was: RX8 Engines
From: Rotary Engine
Date: 2/6/2006, 7:03 AM
To: AA-me


Looking forward to hearing from you.
>> Kind regards,
>> Rupert Gardiner,
>> ASIAN AUTO SPARES
>> 198 Kingston Road,
>> SLACKS CREEK  Qld  4127
>> Tel (07) 3208 0133
>> Fax (07) 3208 0514.
>>
>>
>> If this is Legitimate I want one.
>> Rick Irwin
>
>
> I bought one of Rupert's RX-8 engines (6-port) on Ebay about 6  months
> ago. At the time, the US dollar was a bit stronger, so the price  was
> $1800 USD. Now it is closer to $1900 USD.
>
> My engine arrived exactly as pictured. Complete with engine  harness,
> injectors, fuel rails, intake manifold, throttle body,  alternator, and
> sensors. Oil cooler lines are present, but bent close to the  engine  > for
> shipping.
>
> It arrived nicely padded and strapped on a pallet about 2  months  > after I
> bought it. Shipping was about $300 to Denver. Paperwork fees  were  > about
> $200.
>
> I have not run the engine yet, but it seems just fine from what  I can
> tell by inspection. I put a borescope in the ports. The rotors,  seals,
> and walls look fine. No scoring or hot spots were apparent.  Seems to
> have great compression turning by hand. I would take a very  rough  > guess
> at 20,000 miles, judging from the minor carbon on the rotor  faces and
> exhaust ports.
>
> These engines have never been in a car. They were used by Mazda  for  > some
> sort of dyno testing. I suspect emissions testing, but that is  just a
> wild guess. The clutch and pressure plate on mine had zero wear.
>
> I considered this engine from Rupert a super good deal. When I   > bought it
> for such a low price, I knew that I would still be way ahead  even if I
> had to rebuild it. The fact that it is in such good condition  that I
> won't likely have to do anything internally was a bonus, from my
> perspective.
>
> Rupert is a good guy to deal with. Very helpful and a square  dealer.
>
> Bill Dube'
Bill,
    I am having a problem contacting Rupert via FAX as it will not go
through. As a previous "happy" customer I thought you might be able
to confirm that his enclosed FAX number is correct or, better yet,
you may be able to provide me with his email address. If not then
calling him will be next to try as soon as I can determine the time
difference and call when he is actually awake:)
Thank you,
Randy

Randy,
I think he changed his e-mail a little time ago to  AS8391@bigpond.net.au
Try that one.
George ( down under)


David and George,
  Thank you for your efforts to find out more info and provide an
email address. Unfortunately, Rupert is proving a hard man to
contact. The email address,  AS8391@bigpond.net.au  came back as
undeliverable because of "invalid recipient." Tried FAX again this
morning but was unsuccessful. I will try the old fashioned way
(telephone) tonight. Unfortunately, his awake hours are my sleep
hours but just how bad do I want this engine anyway:)
  Rick, have you tried to contact Rupert yet? Any luck?
Thank you again gentlemen,
Randy

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.