> Looking forward to hearing from you.
>> >> Kind regards,
>> >> Rupert Gardiner,
>> >> ASIAN AUTO SPARES
>> >> 198 Kingston Road,
>> >> SLACKS CREEK Qld 4127
>> >> Tel (07) 3208 0133
>> >> Fax (07) 3208 0514.
>> >>
>> >>
>> >> If this is Legitimate I want one.
>> >> Rick Irwin
>> >
>> >
>> > I bought one of Rupert's RX-8 engines (6-port) on Ebay about 6
>> months
>> > ago. At the time, the US dollar was a bit stronger, so the price
>> was
>> > $1800 USD. Now it is closer to $1900 USD.
>> >
>> > My engine arrived exactly as pictured. Complete with engine
>> harness,
>> > injectors, fuel rails, intake manifold, throttle body,
>> alternator, and
>> > sensors. Oil cooler lines are present, but bent close to the
>> engine > for
>> > shipping.
>> >
>> > It arrived nicely padded and strapped on a pallet about 2
>> months > after I
>> > bought it. Shipping was about $300 to Denver. Paperwork fees
>> were > about
>> > $200.
>> >
>> > I have not run the engine yet, but it seems just fine from what
>> I can
>> > tell by inspection. I put a borescope in the ports. The rotors,
>> seals,
>> > and walls look fine. No scoring or hot spots were apparent.
>> Seems to
>> > have great compression turning by hand. I would take a very
>> rough > guess
>> > at 20,000 miles, judging from the minor carbon on the rotor
>> faces and
>> > exhaust ports.
>> >
>> > These engines have never been in a car. They were used by Mazda
>> for > some
>> > sort of dyno testing. I suspect emissions testing, but that is
>> just a
>> > wild guess. The clutch and pressure plate on mine had zero wear.
>> >
>> > I considered this engine from Rupert a super good deal. When I
>> > bought it
>> > for such a low price, I knew that I would still be way ahead
>> even if I
>> > had to rebuild it. The fact that it is in such good condition
>> that I
>> > won't likely have to do anything internally was a bonus, from my
>> > perspective.
>> >
>> > Rupert is a good guy to deal with. Very helpful and a square
>> dealer.
>> >
>> > Bill Dube'
>> Bill,
>> I am having a problem contacting Rupert via FAX as it will not go
>> through. As a previous "happy" customer I thought you might be able
>> to confirm that his enclosed FAX number is correct or, better yet,
>> you may be able to provide me with his email address. If not then
>> calling him will be next to try as soon as I can determine the time
>> difference and call when he is actually awake:)
>> Thank you,
>> Randy
>
> Randy,
> I think he changed his e-mail a little time ago to
> AS8391@bigpond.net.au
> Try that one.
> George ( down under)
>
David and George,
Thank you for your efforts to find out more info and provide an
email address. Unfortunately, Rupert is proving a hard man to
contact. The email address, AS8391@bigpond.net.au came back as
undeliverable because of "invalid recipient." Tried FAX again this
morning but was unsuccessful. I will try the old fashioned way
(telephone) tonight. Unfortunately, his awake hours are my sleep
hours but just how bad do I want this engine anyway:)
Rick, have you tried to contact Rupert yet? Any luck?
Thank you again gentlemen,
Randy
Randy,
I rang him - he's local to me.
New e-mail
Asian198@bigpond.net.au
Phones and Fax must have the 61 7 prefix as in 61 7 3208 0514
61 = Australia, 7 = State ( the 0 is dropped with overseas calls - why?)
then the local number - OK!
George (down under)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.