Hi Paul!
I am hoping that I have found the right guy?
Briefly to introduce myself.. I spoke with Terry Godsall over the
weekend, a part of my research into the TransAm Camaros and Firebirds
which I have been compiling now for almost 10 years.
I had a note that
*Lamar Engineering* supplied fibre-glass panels for
(amongst others) "Firebirds" and you will recall that your ad' back in
the distant past (!) included a photo of the #77 Gagnon Spring Firebird
which was driven at the time by Craig Fisher..
In talking to Terry, he told me that you dealt with all the
Aerodynamic's for the Firebird programme of '69.. and seeing your
association with the "Everett Hatch" Trophy (Everett being of course an
ex-Camaro race driver) I am assuming that you are the same guy?
If so, I am hoping that you may be able to fill in some gaps about the
Firebird programme so that I can prepare a definitive history of that
era..?
I am trying to document the conversion of the Godsall Camaro into the
"Camaro-bird" and how and when that happened.. and I suspect you may
have played a part in that?
My second brief question is whether you recall a guy called "Jerry
Mahoney"?... I believe he had an association with "Fibreglass" and came
from the West Coast.. He went to England, and (
_IF_ I'm correct) sent a
camaro race car to England to sell (to fund the trip?) and eventually
set up his own Fibreglass company in London.. Does that ring any bells?
Hopefully I have the right guy?... Fingers crossed!
With best regards
Jeff Barley
Yep that's is me. Don't remember Jerry Mahoney. Criag Fisher
was an interesting driver :)
However I did not do fiberglass parts. I just provided the engineering
on the Firebirds and did some full scale test at El Mirage dry
lake and in Las Vegas at the race track out in the desert
under contract with GM. The stock 1970 TransAm Firebird was the result.
I also did the aerodynamics on the McLaren Jerry drove
in the Can Am at St Jovite among others such as the Ti22.
Paul Lamar ...No rotor no motor.
Hi paul!... Glad I was able to make contact!!!. Thanks for the note!
Can I ask if you had anything to do with the "conversion" of a camaro to
a Firebird with Terry, and if the testing at the dry lake involved a
camaro?
Thanks for your time!
Jeff
The Firebird and the Camaro are identical for all
practical purposes. Swap the engine and you have a Camaro.
Well maybe a few front end body parts :)
I'll tell you a funny Story. Jim Hall got the Camaro race program from
Chevy around 1970. I had done the development on the Trans Am spoiler
package in California and had flown up to Black Lake GM proving ground to test
the pre production model. While we we out on the "lake" (mile square asphalt)
we saw the Chevy instrumentation van about a 1/4 mile away. I asked
Herb Adams (GM Trans Am project engineer at the time.) who was that over
there? Herb said "I don't know. Lets go over
and see." So we jumped in the pre production Trans Am model and
drove over. Wonder of wonders there was Jim Hall and a bunch of
Chevy engineers with a previous generation race Camaro. They had
not seen the pre production TransAm before and they were astounded
by the spoiler package. When Jim saw me he said "what are you doing here?"
I told him what I had done in California and said the Pontiac stylist
did not do it exactly the way I wanted it. They swept back the
ends of spoiler and wrapped them down and around the rear fenders.
I told Jim it would work better if the ends went down at a 45 degree
forward angle. Low and behold Chevy used the same tooling for the center section
TransAm spoiler and Chevy stylist did the ends the way I wanted them. :)
For more info read
http://www.rotaryeng.net/who.html
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.