Hi All -
I was thinking about using a Naca duct to turn an internal
impeller, to supply
alternate power. This could be inside the duct , or the duct could
curve
enough that the alternator could be outside of it.
Obviously there are limits to output and physical size ( under the
cowl or in
the fuse ) but I got the idea from an external unit that was just
hung out in
the airstream , under the aircrafts belly IIRC.
Fly Good & Build good - Bryan
Won't work Bryan. NACA ducts don't like restrictions.
Use a ram air duct if you must. Most airliner RATs
(Ram Air Turbine) drop down into the air stream.
Paul Lamar ...No rotor no motor.
To check out wind driven alternator for aircraft go to http://
www.basicaircraft.com/ These units look small enough to fit into a
small duct if hanging it out in the air stream is not acceptable.
Install 2 and have a back up. I wonder if we could make such a unit?
Paul? Jerry
p.s. my first Lusconbe, a 1938 8A had a wind driven generator
that weighed a lot but did produce enough power to run a radio and
lights. I even thought about installing a starter but came to my
senses and removed the generator instead. Simplify, simplify.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.