>
> these are pretty coooollllll
>
> http://www.browellbellhousing.com/pages/bellhousings-page.html
>
>
> This Mazda version jumped right out at me. Too bad they are
> 3/8 inch thick steel scatter shields.
>
> Paul Lamar ...No rotor no motor.

not all are steel........
*6.1 Aluminum Bellhousing with Inspection Holes and Starter Pocket: **
$1875
Kevin

How thick or what does it weigh? :)
-- 
Paul Lamar ...No rotor no motor.

Paul

yeah I think some of those are aluminum the idea I'm going for here
is maybe we can contact these people to make, or retrofit an
existing housing. What say yee? go through that site you'll
see the aluminum housing in there.

Tony


The point is they are basically trying to meet NHRA racing
rules on scatter shields. Clutchs are known for blowing
up and taking peoples feet off at the angle. You are not going to contain
a clutch explosion with any aluminum less than about 1/2 inch thick
or so. Read VERY VERY heavy. These bell housings weigh a ton.!!!!