Subject: 2 rotors or 3?
From: Rotary Engine
Date: 2/9/2006, 6:11 PM
To: AA-me



I am in the early stages of building a Barracuda.  For many reasons (of
varying degrees of validity) I wish to use a rotary engine.
(Zoom-Zoom!)  The specifications for this aircraft call for 250 HP to
300 HP.  (The builders’ manual recommends variants of the O-540
family.)  My personal mission statement for this project specifies high
altitude, fast, long distance cross country.  I have been looking into a
turbo-normalized 20B for the project.  Although this engine would
produce the power that I want at the altitudes I want without working
near full capacity, they seem to be scarce, (read pricey).



My question for all of you is this:  Is it un-reasonable to expect to
get 300 HP out of a turbocharged two rotor engine through 12,000’ and
still squeak out 250 HP at FL20 without pushing the engine beyond
reasonable limits?  Reasonable to me is in the range of 60% to 80% power.



I would consider the 2 rotor engine as long as I did not have to “Trick
it out” too far, compromising reliability for ponies.



Bst rgds,

Scott Carroll

Lakeside, Ca.




I suggest the 3 rotor.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.