The apex of the landing gear fastens just below the top engine mount
attach station and the two lower mount attach stations are on the
landing gear but the landing gear, itself, is fastened to the fuselage
by 3/8 inch bolts through one inch rubber bushings backed front and back
by 1/4 inch rubber washers.
  At the sides of the fuselage, at water line 42 I installed fixed 5/16
anchor nut hard points that will probably have to be cushioned.
  Let me know if you need more information.

hurant karibian

I need the length of the cowl from the top of the fuse to the prop
flange. Are the hard points for the motor mount just those three
locations on the landing gear tubes? Do you intend using the 5/16
bolts at water line 42 for the top hard points of the motor mount?

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.