Subject: 2 rotors or 3?
From: Rotary Engine
Date: 2/10/2006, 8:24 AM
To: AA-me



***Snip***

My question for all of you is this:  Is it un-reasonable to expect to
get 300 HP out of a turbocharged two rotor engine through 12,000' and
still squeak out 250 HP at FL20 without pushing the engine beyond
reasonable limits?  Reasonable to me is in the range of 60% to 80%
power.

I would consider the 2 rotor engine as long as I did not have to "Trick
it out" too far, compromising reliability for ponies.

Bst rgds,

 Scott Carroll

Lakeside, Ca.

-----------------------------------------------
I suggest the 3 rotor.
-- 
Paul Lamar ...No rotor no motor.

---------------------------------------------
Are there any specific engine builders that you would recommend for the
20B?

Bst rgds,
Scott Carroll
Lakeside, CA
---------------------------------------------
Mazdatrix in Signal Hill. They have their own dyno.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.