This is Dave's current system. He is not entirely happy
with the water cooling.
Air flows through the inter cooler on the left side and the oil
cooler on the right side and then through the 2 inch thick rad
mounted below the engine and out the exit below the cowl.
The air is also heated by passing over the turbo charger
and exhaust manifold before it flows through the rad.

Does anybody have any suggestions what Dave could to to improve
the water cooling?

Oil cooling and inter cooling are fine.

Paul Lamar ...No rotor no motor.

Give the rad it own air supply.  This could be done with a belly
scoop and plenum above the radiator.  Air passing through intercooler
and oil cooler could be dumped through the cowl sides. Adjustable
louvers on all three openings would be a good idea.  Jerry


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.