The hard points I added are on the 3/4x1/16th
stringer that runs the length of the fuselage to which
I extended the normal 1/2x 1/8th reinforcement strip
on the outside, all the way to the firewall.
 I welded two 5/16th nuts together on a seven inch
piece of 4130 angle and riveted that to the stringer
and side wall. If you think that is strong enough then
use it.
 I don't know how you could make a mount truss from
that single top point or if a cross bar from that
point would be feasable.

(never sign his messages.) Hurant Karibian

I think I might be abled to.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.