Subject: sliding throttle for p-ported engines
From: Rotary Engine
Date: 2/11/2006, 8:42 PM
To: AA-me



     > Paul, take a look at these bell mouths that are intended for the
     > second edition of my intake. I bought them from a company in
     > Australia called " The Velocity of Sound." They were $16.00 ea.
     > Unfortunately the shipping via mail was $25.00 They have many
     > shapes, styes (different neck lengths and sizes. Check them out at
     > www.velocity-of-sound.com
     > Jerry
     >
     >
     > Nice.
     > --
     >
     >
     >
     > They do look nice. One of us should just order a bunch & resell
    them to
     > other builders as the need comes up, to amortize the shipping costs.
     >
     > The only problem with the bell mouths on my slide throttle intake is
     > they are not detachable in any way -- thus I am in somewhat of a
    quandry
     > as to how to build an air intake box that seals nicely around the
     > intakes. I've more or less resigned myself to having a 2-piece box
     > that I screw together so I can wrap it around the bell mouths.
     >
     > Speaking of the air intake box - am I trying to feed it with
    ram-air, or
     > am I going to draw air from within the cowling? I have noted on a
     > number of recent pictures of rotary installs that most seem to
    have a
     > nice air filter & draw air from within the cowling.
     >
     > Mark Supinski
     >
     > You can always use a small grinder and grind them off Mark.
     > for best results fore go the filter. Your airport is not dusty
     > is it?
     >
     > Paul Lamar ...No rotor no motor.


Does anyone have any pictures of the sliding throttle for p-ported engines?
Neal Scherm

 Here are some  picturs.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2005 All world wide rights reserved.