Great minds think alike -- that is exactly the same formula I  have  been
planning on, Jerry.  The only difference is deciding which also feeds
the VAM muffler -- gotta push some air through the center tube to  cool
the thing.

Mark Supinski

Mark, buy a 2"bell mouth with a long enough neck to attach a hose;
install it below the nostril opposite the cool tube.  Run a hose
between the two.   Jerry


One two inch hose is not big enough.

I think it is plenty to supply the cool tube.   Jerry


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.