Paul - or anyone

Does anyone have all of the possible final drive ratios for the Ford,
Dodge or GM cluster sets that might be used in a PSRU.

Thanks
Kevin

That is a real good question. All I know for sure is you can
get 2.17, 3.17, 1.85 and 2.85 out of Ford A4OD prats.

 From the looks of it it is real hard to use the GM parts.
--
Paul Lamar ...No rotor no motor.

Kevin,
The GM planetary is 3.2 and 2.2. but then there's the Overdrives for both
the Ford and GM but I don't think their as strong.
I'm looking at the possibility of an aftermarket planetary at 2.8 (1.8) but
don't know if that will be a cost effective proposition.
George (down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2006 All world wide rights reserved.